Your sustainability report probably has a number on it that your team didn’t generate by doing anything wrong. It comes from the electricity your offices, plants and warehouses buy from the grid. For most Indian businesses, that single line is where Scope 2 emissions sit, and it is often the largest and most fixable part of the carbon footprint.
The good news is that you don’t need a decade-long transformation to bring it down. You need a clear picture of where the number comes from and a plan to replace grid power with power you generate yourself.
What Scope 2 Emissions Actually Are
Under the GHG Protocol, emissions fall into three buckets. Scope 1 is what you burn directly, such as fuel in boilers and company vehicles. Scope 3 is everything across your value chain, from suppliers to product use. Scope 2 sits between them: the indirect emissions from electricity, steam, heating or cooling you purchase.
Here’s the part many teams miss. You don’t emit these gases at your site, but you cause them. Every unit drawn from a coal-heavy grid carries a carbon cost, and India’s grid still emits roughly 0.7–0.8 tonnes of CO2 for every megawatt-hour. A plant consuming 5,000 MWh a year is therefore carrying several thousand tonnes of Scope 2 emissions before it has done anything unusual.
Why This Number Suddenly Matters
A few years ago, this figure lived in a CSR appendix. Now it shows up in places that affect revenue.
- Disclosure: Top listed companies in India report under SEBI’s BRSR framework, which asks for emissions data, and the questions are getting more detailed.
- Customers and supply chains: Large buyers, especially exporters’ overseas customers, increasingly ask suppliers for their carbon data. A vague answer can cost you a tender.
- Investors and lenders: ESG performance now feeds into funding conversations and cost of capital.
- Cost: Cutting grid dependence also cuts the bill, which is why finance teams and sustainability teams are finally on the same side of the table.
That last point is the one we’d underline. In our experience, projects that save money and carbon together get approved faster than projects that only do one.
Why Solar Is the Most Direct Lever
If you want a practical route to carbon emission reduction, electricity is the place to start, because the alternatives are slower. Process changes take years. Supplier engagement depends on other people. Solar is different: you can size it, build it and measure it.
Every unit your solar plant generates and you consume displaces a unit that would have come from the grid. The calculation then follows naturally. Multiply units displaced by the grid emission factor to get the tonnes of Scope 2 emissions you’ve removed. There’s no offsetting trick involved, only a real reduction in purchased electricity.
This is why solar energy for businesses has moved from the facilities budget to the sustainability agenda. A rooftop system is also visible, measurable and auditable, which auditors and ESG raters appreciate.
Choosing the Right Solar Route
Not every business has the same options, so it helps to see the main ones side by side.
On-site rooftop solar
Best for factories, warehouses, institutions and commercial complexes with usable roof area and daytime loads. The power is generated and consumed at the same place, so you avoid transmission losses and get the cleanest story for reporting.
Ground-mounted and off-site solar
When roof area is limited, a ground-mounted plant or a solar park can supply power through open access or group captive arrangements. This suits larger consumers with high demand. The paperwork is heavier, but the scale is much larger.
Solar with battery storage
Solar covers daytime consumption. If your operations run in the evening or at night, battery energy storage extends the benefit by holding surplus generation for later. It also provides backup and helps manage peak demand.
For most businesses, the right answer is a mix. A rooftop system covers the base load first, and storage or off-site capacity fills the gaps as the programme matures.
Financing Without the Heavy Upfront Cheque
A common reason solar projects stall is the assumption that someone has to find a large amount of capital. There are three models worth knowing:
- CAPEX: You invest and own the plant, which gives the highest long-term savings.
- RESCO: A developer funds and runs the system, and you pay only for the power at an agreed tariff.
- BOOT: The developer builds, owns and operates for a fixed term, then transfers the plant to you.
Each one reduces your Scope 2 emissions in the same way. What differs is the balance sheet impact, which is why a good partner will model all three before recommending one.
Getting the Reporting Right
Here’s where things get interesting. There are two accepted ways of accounting for Scope 2 emissions. The location-based method uses the average grid factor for your region. The market-based method reflects the specific electricity you’ve contracted, which is where on-site and contracted renewable power shows up.
A few habits keep your numbers defensible:
- Measure generation at the meter. Sub-metering your solar output gives you clean, auditable data.
- Document the factor you used. Use the official grid emission factor for the reporting year, and state it.
- Keep boundaries consistent. If you include certain facilities in the baseline, track the same ones afterwards.
- Don’t double count. If you sell or transfer renewable energy certificates from a plant, you can’t also claim that same energy as your own reduction.
None of this is complicated, but it needs to be set up before the first report, not after.
What to Look for in a Solar Partner
If you’re evaluating a solar panel company in Mumbai, the usual price comparison only tells part of the story. For a sustainability-driven project, the questions that matter more are:
- Do they provide generation estimates and a CO2 avoidance calculation you can use in your reporting?
- Can they handle design, installation and O&M under one roof, so performance is one team’s responsibility?
- Do they have experience at your scale, including industrial and commercial projects?
- Will they give you plant-level data after commissioning, not just a handover?
Mumbai adds its own conditions: humid, salt-laden air that affects equipment, monsoon months that dip generation, and approvals that need local knowledge. Teams searching for solar energy services in Mumbai should look for an installer that talks about these upfront, rather than one that quotes the best-case sunshine.
If you’re also looking at ESG consulting services in Mumbai, it’s worth separating the roles. ESG advisers help you set targets and frame disclosures. A solar and green infrastructure partner delivers the hardware and the measurable reduction. The two work best when the numbers handed to your ESG team are generated by a real plant, not estimated from a brochure.
Start With the Baseline
The simplest first step is to pull twelve months of electricity bills, split them by facility, and multiply by the grid factor. That single exercise gives you your Scope 2 baseline, and it tends to reveal which sites deserve solar first.
From there, the path is straightforward: assess roofs, size the systems, choose a financing model and set a reduction target you can report against. Renewable energy for businesses isn’t a distant ambition anymore. It’s a project you can plan this quarter.
If you’d like to see what this could look like for your sites, Jevanta Renewables offers a free consultation, and its ROI calculator on the website gives a quick estimate of commercial and industrial solar savings. Their team can also advise on green infrastructure, including IGBC and GRIHA-aligned designs, as part of your wider corporate sustainability and ESG sustainability goals.





